Cleanroom Air Condition
In order to maintain the required temperature, humidity, wind speed, pressure and cleanliness and other parameters in the clean room, the most commonly used method is to continuously send a certain amount of processed air to the room to eliminate various heat and humidity interference and dust pollution inside and outside the clean room . In order to obtain a certain level of air sent into the clean room, the cleanroom air condition needs to be processed and continuously sent into the room, and part of it is continuously discharged from the room.
Hospital central air conditioning system design is based on the principle of building an internationalized, modern, high-standard, energy-saving; Reasonable air conditioning airflow organization and temperature&RH control are the key points for Hospital different sections HVAC system design, therefore, purification air handling unit is widely required for providing fresh air and make people feel comfortable in hospital.
air handling units are combined by different function sections, they are cooling/heating coil, electric heater, filters, dehumidifier or humidifier, heat recovery section,etc. They can deal with air up to140000 m3/h, widely used in the fields of electronic, apparatus, machinery, medicine, food and clean air conditioning system.
1. Frame work
T type aluminium alloy profile, with anti-cold-bridge function and good strength.
2. Double-skin Panel
Double-skin panel use galvanized steel sheet (inner) and powder coated sheet(outside) with 30mm/50mm thick Polyurethane(PU) insulation sandwiched between two layers.
3. Cooling coils
Usually, cooling coils adopt copper tubes with mechanically pressed-on aluminium fins, and copper tubes with copper fins coil are also available. There are 4 rows, 6 rows and 8 rows coil for choice.
Washable aluminium filter G4, bag filter F7 or F8, HEPA filter, which can meet different requirements of cleaning class.
5. Optional devices
Electric heater, humidifier, eliminator, silencer, air damper, etc. They can be add to the air handling units according to different requirements.