Types of: Steel
The laboratory bench of the pharmaceutical laboratory uses 15mm repairable epoxy resin countertops, which is resistant to strong acid and alkali corrosion. The heat distortion temperature is above 240 °C, the density is not less than 2 g/cm3, and it is not cracked, moisture-proof and resistant. Contaminated, repairable, safe and reliable; the cabinet is made of high-quality 1mm thick epoxy resin coated cold-rolled steel plate, rust-proof, moisture-proof, high-temperature resistant and wear-resistant. The single cabinet is detachable structure, and each cabinet can be used alone or in combination. Use; the load-bearing performance of the central station, the side table and the corner cabinet is ≥150KG/m2, the load capacity of the instrument table and the high-temperature table is ≥300KG/m2; the material of the cabinet door and the drawer panel is the same as the cabinet material, and the cabinet door is double-layered. The middle part is filled with soundproof material; all the test benches with cabinet doors have built-in movable laminates, which can be adjusted up and down freely every 20mm. The thickness of the laminate is 20mm. It is supported by four steel layer buckles. The bearing is larger than 50kg; the drawer is embedded. Heavy-duty clip-on slide rails, nylon balls, and self-closing structure design can protect the objects carried in the cabinet from unnecessary damage due to too much closing force.